Renewable Design for Ss Wire Mesh - Woven Wire Mesh For Sieving,Screening,Shielding And Printing – Anping
Renewable Design for Ss Wire Mesh - Woven Wire Mesh For Sieving,Screening,Shielding And Printing – Anping Detail:
Plain Weave
The simplest and most commonly used type with square openings. It is woven by alternating the weft wire over and under the warp wire and permits positive control of size of materials to be screened or filtered.
Twill Weave
Each weft wire passes alternately over and under 2 warp wires, staggered on successive warps. It is used where fine mesh must carry a heavy load.
Oblong Weave
Also known as broad weave, it is made preferably in plain weave with an opening ratio (length/width) of 3:1. Other ratios are possible. Triple warp weave is also available to provide large open areas. It is used for vibrating sieving screens or other architectural applications.
3-Heddle Weave
In this weave type, every warp wire alternately passes up and down each one and two weft wires alternately. Similarly, each weft wire goes alternately up and down of each and two warp wires. It is widely used in industry filters, filter discs and filter cylinders for filtration.
5-Heddle Weave
In this weave type, every warp wire alternately up and down each single and four weft wires and vice versa. It provides a rectangular opening and offers high flow rates. It is widely used in filtration of petroleum & chemical industries.
Specification
Material: Stainless Steel,SS304,SS316,SS316L, SS201,SS321,SS904,etc. Brass, Copper, Nickel, silver, monel alloy, inconel alloy, hastelly alloy, iron chrome aluminum alloy, iron wire carbon steel like 65mn, galvanized wire, etc.
Wire diameter: 0.02–2 mm
Mesh count: 2.1–635 mesh
Aperture width: 0.02–10.1 mm
Open screening area: 25% – 71%
Fine Mesh
Mesh Count | Wire Diameter (d) | Aperture Width (w) | Open Screening Area | Mass | Aperture Quantities 1 cm2 |
No. | mm | mm | % | kg/m2 | |
635 | 0.02 | 0.02 | 25 | 0.127 | 62500 |
508 | 0.025 | 0.025 | 25 | 0.159 | 40000 |
450 | 0.027 | 0.03 | 27.7 | 0.162 | 31388 |
400 | 0.027 | 0.036 | 32.7 | 0.147 | 24800 |
363 | 0.03 | 0.04 | 32.7 | 0.163 | 20424 |
325 | 0.035 | 0.043 | 30.4 | 0.199 | 16372 |
314 | 0.036 | 0.045 | 30.9 | 0.203 | 15282 |
265 | 0.04 | 0.056 | 34 | 0.212 | 10885 |
250 | 0.04 | 0.063 | 37.4 | 0.197 | 9688 |
210 | 0.05 | 0.071 | 34.4 | 0.262 | 6836 |
202 | 0.055 | 0.071 | 31.8 | 0.305 | 6325 |
200 | 0.053 | 0.074 | 34 | 0.281 | 6200 |
200 | 0.05 | 0.08 | 37.9 | 0.244 | 6200 |
188 | 0.055 | 0.08 | 35.1 | 0.285 | 5478 |
170 | 0.055 | 0.094 | 39.8 | 0.258 | 4480 |
150 | 0.071 | 0.1 | 34.6 | 0.366 | 3488 |
154 | 0.065 | 0.1 | 36.7 | 0.325 | 3676 |
200 | 0.03 | 0.1 | 61 | 0.078 | 6200 |
150 | 0.06 | 0.11 | 41.9 | 0.269 | 3488 |
130 | 0.08 | 0.112 | 34 | 0.423 | 2620 |
140 | 0.06 | 0.12 | 44.4 | 0.254 | 3038 |
120 | 0.09 | 0.12 | 32.7 | 0.49 | 2232 |
124 | 0.08 | 0.125 | 37.2 | 0.396 | 2383 |
110 | 0.09 | 0.14 | 37.1 | 0.447 | 1876 |
106 | 0.1 | 0.14 | 34 | 0.529 | 1742 |
100 | 0.11 | 0.14 | 31.4 | 0.615 | 1550 |
100 | 0.1 | 0.15 | 36 | 0.508 | 1550 |
100 | 0.1 | 0.16 | 37.9 | 0.488 | 1550 |
91 | 0.12 | 0.16 | 32.7 | 0.653 | 1284 |
80 | 0.14 | 0.18 | 31.6 | 0.784 | 992 |
84 | 0.1 | 0.2 | 44.4 | 0.42 | 1094 |
79 | 0.12 | 0.2 | 39.1 | 0.572 | 967 |
77 | 0.13 | 0.2 | 36.7 | 0.65 | 919 |
46 | 0.15 | 0.4 | 52.9 | 0.505 | 328 |
70 | 0.1 | 0.261 | 52 | 0.354 | 760 |
65 | 0.1 | 0.287 | 54.6 | 0.331 | 655 |
61 | 0.11 | 0.306 | 53.6 | 0.307 | 577 |
56 | 0.11 | 0.341 | 56.8 | 0.283 | 486 |
52 | 0.12 | 0.372 | 56.8 | 0.374 | 419 |
47 | 0.12 | 0.421 | 60.3 | 0.342 | 342 |
42 | 0.13 | 0.472 | 61.2 | 0.306 | 273 |
Coarse Mesh
Mesh Count | Wire Diameter (d) | Aperture Width (w) | Open Screening Area | Mass | Aperture Quantities 1 cm2 |
No. | mm | mm | % | kg/m2 | |
2.1 | 2 | 10.1 | 69.7 | 3.95 | 0.68 |
3 | 1.6 | 6.87 | 65.8 | 3.61 | 1.4 |
3.6 | 2 | 5.06 | 51.3 | 6.77 | 2.01 |
4 | 1.2 | 5.15 | 65.8 | 2.71 | 2.48 |
4 | 1.6 | 4.75 | 56 | 4.81 | 2.48 |
5 | 1.2 | 3.88 | 58.3 | 3.38 | 3.88 |
5 | 1.6 | 3.48 | 46.9 | 6.02 | 3.88 |
6 | 0.9 | 3.33 | 62 | 2.28 | 5.58 |
6 | 1.2 | 3.03 | 51.3 | 4.06 | 5.58 |
8 | 0.7 | 2.48 | 60.8 | 1.84 | 9.92 |
8 | 1 | 2.18 | 46.9 | 3.76 | 9.92 |
8 | 1.2 | 1.98 | 38.7 | 5.41 | 9.92 |
10 | 0.4 | 2.14 | 71 | 0.75 | 15.5 |
10 | 0.5 | 2.04 | 64.5 | 1.18 | 15.5 |
10 | 0.6 | 1.94 | 58.3 | 1.69 | 15.5 |
12 | 0.4 | 1.72 | 65.8 | 0.9 | 22.32 |
12 | 0.5 | 1.62 | 58.3 | 1.41 | 22.32 |
12 | 0.65 | 1.47 | 48 | 2.38 | 22.32 |
14 | 0.5 | 1.31 | 52.5 | 1.65 | 30.38 |
16 | 0.4 | 1.19 | 56 | 1.2 | 39.68 |
16 | 0.5 | 1.09 | 46.9 | 1.88 | 39.68 |
18 | 0.4 | 1.01 | 51.3 | 1.35 | 50.22 |
18 | 0.5 | 0.91 | 41.7 | 2.12 | 50.22 |
20 | 0.3 | 0.97 | 58.3 | 0.85 | 62 |
20 | 0.35 | 0.92 | 52.5 | 1.15 | 62 |
20 | 0.4 | 0.87 | 46.9 | 1.5 | 62 |
20 | 0.5 | 0.77 | 36.8 | 2.35 | 62 |
24 | 0.36 | 0.7 | 43.5 | 1.46 | 89.28 |
30 | 0.25 | 0.6 | 49.7 | 0.88 | 139.5 |
30 | 0.3 | 0.55 | 41.7 | 1.27 | 139.5 |
35 | 0.25 | 0.5 | 44.4 | 1.03 | 189.9 |
40 | 0.2 | 0.44 | 46.9 | 0.75 | 248 |
40 | 0.25 | 0.39 | 36.8 | 1.18 | 248 |
45 | 0.25 | 0.31 | 31 | 1.32 | 313.88 |
50 | 0.18 | 0.33 | 41.7 | 0.76 | 387.5 |
50 | 0.2 | 0.31 | 36.8 | 0.94 | 387.5 |
50 | 0.23 | 0.28 | 29.9 | 1.24 | 387.5 |
60 | 0.12 | 0.3 | 51.3 | 0.41 | 558 |
60 | 0.16 | 0.26 | 38.7 | 0.72 | 558 |
60 | 0.18 | 0.24 | 33 | 0.91 | 558 |
70 | 0.12 | 0.24 | 44.8 | 0.48 | 759.5 |
80 | 0.12 | 0.2 | 38.7 | 0.55 | 992 |
Product Display
Product detail pictures:
Related Product Guide:
Gaining client pleasure is our company's aim without end. We are going to make excellent efforts to create new and top-quality goods, meet your special requirements and provide you with pre-sale, on-sale and after-sale companies for Renewable Design for Ss Wire Mesh - Woven Wire Mesh For Sieving,Screening,Shielding And Printing – Anping , The product will supply to all over the world, such as: Malta, The Swiss, Auckland, We welcome you to visit our company & factory and our showroom displays various products that will meet your expectations. Meanwhile, it is convenient to visit our website. Our sales staff will try their best to provide you with the best services. If you need more information, please do not hesitate to contact us via E-mail, fax or telephone.
By Letitia from Florida - 2017.08.18 18:38
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Sabrina from Cambodia - 2018.12.25 12:43